(Boron Nitride NanobBarb, abbreviated as BNNB) This material is hexagonal boron nitride crystals nucleated on the outer surface of boron nitride nanotubes. Irregular hexagonal boron nitride crystals enhance the cross-linking between nanotubes and PEI.
 

Unreinforced polyetherimide (PEI) rods are translucent amber  color, has excellent toughness, naturally exhibit UL-94V0 flame retardancy, and produce very little smoke when burning.

PEI has excellent dimensional stability，even without fiber reinforcement, PEI does not warp. As a non-crystalline plastic, it generates  high temperatures during processing and does not easily deform after cooling, is a suitable plastic rod for high precision machining.

Unfilled PEI sheet  has good toughness. The dielectric loss factor (tanδ) of PEI resin is very small, and it still performs excellently at high frequencies, with very stable dielectric strength.
It can achieve UL94 V-0 level without adding flame retardants, with a high oxygen index (about 47%), low smoke emission and low toxicity during combustion, ensuring extremely high safety

PEEK 880G is our Enhanced Flow unfilled PEEK pellets (MFR 20 g/10min, ISO 1133), offering easier mold filling for thin-walled or complex injection parts while retaining the inherent toughness of virgin PEEK. Compared with high-viscosity PEEK 990G, 880G provides lower melt viscosity; vs. ultra-high-flow grades it has higher molecular weight and better fatigue resistance. Download TDS and selection guide.

Anti-static ESD PEEK sheets not only have excellent mechanical properties but also stable anti-static performance. They can be used for a long time in high-temperature environments without significant changes in performance and resistance

extrusion grade has excellent hydrolysis resistance, low-temperature flexibility, antimicrobial resistance, mold resistance, low water swelling, high transparency and low crystal point, excellent anti-yellowing, dimensional stability during processing, and high mechanical and physical properties with high weight matching.

The toughness of unfilled PEEK resin is better than PEEK GF30 or PEEK CF30,Pure PEEK has better impact resistance performance.Pure PEEK resin wears tools (carbide/diamond) extremely slowly, has low processing costs, and easily achieves high quality surface.
When many holes or screw threads need to be drilled, PEEK resin rod is a good choice, and the processed products also have good precision

Glass fiber reinforced PA66 is mainly applied to components with high rigidity and dimensional stability. Meanwhile, its safety has been greatly enhanced through flame retardant modification

881G is a high purity  virgin grade PEEK pellets,It is specifically designed for the production of PEEK 3D printing filaments. It has excellent fluidity. The 3D printed filaments made from it print very smoothly, significantly reducing the risk of clogging the nozzle, and it also has excellent toughness.

PEI 2300 sheet has enhanced  bending strength and higher rigidity than ultem 1000 sheet, it also has improved the load-bearing capacity  at high temperatures, and maintained good electrical insulation even with the addition of glass fiber

PEEK GF30 Sheet is a structural grade engineering plastic sheet formed by uniformly dispersing 30% short cut glass fibers in a high-performance polyether ether ketone (PEEK) matrix and extruding them at high temperature and high pressure. The mesh reinforcement effect of glass fiber makes the bending modulus of the material reach 11.3 GPa (about 2-3 times that of unreinforced PEEK), and the tensile strength is ≥ 170 MPa. Combined with extremely low creep rate and thermal expansion coefficient, it endows the sheet metal with structural rigidity and long-term load-bearing stability.

To 2026, 30% carbon filled PEEK material is currently one of the most outstanding thermoplastic composite materials in terms of performance.
Its temperature resistance and mechanical strength have been significantly improved, with less deformation at high temperatures, making it a reliable precision material with high temperature resistance

Polyphenylene sulfide (PPS) filled with 40% glass reinforcement material, it possesses high strength, excellent heat resistance and chemical resistance, high insulation and inherent flame retardancy. The high hardness and rigidity at high temperatures enable good load-bearing performance, and is suitable for various components that require strength and resistance to various chemical substances, such as valves, pipelines, new energy batteries, and pump accessories.

PPS CF30 is a carbon fiber reinforced anti-static PPS, featuring high modulus, high mechanical strength, excellent heat resistance and chemical resistance. It is mainly applied in fields that require anti-static properties

Our virgin PPSU pellets are 100% non-recycled, ensuring ultra-high purity and superior toughness. Completely clean and safe, they meet strict standards for medical device casings, as well as for food contact

PRES PEEK 990CA30 is a 30% carbon fiber reinforced high‑viscosity PEEK compound.

MFI: 2.3 g/10 min (ISO 1133, 380°C / 5 kg).

The higher melt viscosity minimizes fiber attrition during injection molding, contributing to improved fiber retention and enhanced tensile and flexural properties of molded parts.
 

PEEK 990GF30 is a high-viscosity, 30 % glass fiber reinforced PEEK  pellets  that delivers substantially higher tensile strength, flexural modulus and improved dimensional stability compared to unfilled PEEK. 
The high melt viscosity provides stable extrusion behavior and minimizes warpage in thick-section molded parts. With reduced coefficient of thermal expansion (CTE) and good creep resistance at elevated temperature, it is suitable for extrusion of rod, sheet and tube, as well as thick-walled injection molding requiring structural rigidity.
 Not recommended for thin-wall or long-flow-path injection due to limited melt flow (MFR ≈ 4.5 g/10 min, ISO 1133, 380 ℃/5 kg).

Glass fiber has greatly enhanced the bending strength and rigidity of PEI, improved the load-bearing capacity of PEI material at high temperatures, and maintained good electrical insulation even with the addition of glass fiber

Food grade PA66 After  hydrolysis-resistant reinforced , it is not prone to precipitation at high temperatures, has good color fastness, bright luster and is not easy to fade.

Natural PPSU sheet is our most comprehensive stock offering. We maintain the widest inventory breadth for amber PPSU plates, ensuring immediate availability for urgent projects.
 Featuring an unmatched thickness range from ultra-thin 1mm​ sheets for precision medical components to heavy-duty 120mm​ gauge plates for industrial tooling, our translucent amber stock delivers inherent FDA compliance and visual flow inspection—all ready for rapid dispatch.